Restore Apple Watch (v.3) & Remove Store Demo / Retail Mode?
How to I access and use Genuine Apple Firmware?
Download
How to enter Apple Watch DFU mode
In order to restore software on your Apple Watch from a firmware file on your computer, or downgrade to an older firmware, you’ll need to put the device in DFU mode.
1) Remove the strap on the button side of your Apple Watch case.
2) Place the sewing needle in the port hole. Don’t press the needle to access that door like you would when opening the SIM card tray on your iPhone: instead, apply light downward pressure while pole-vaulting the needle to the side in order to pop the cover off the port.
3) Now connect your iBUS dongle to the watch’s diagnostics port.
4) Connect a Lightning cable to the other end of the dongle and the other end of the cable to your computer’s USB port, then launch iTunes.
5) Turn on your Apple Watch and wait until it boots.
6) Press and hold both the Digital Crown and the Side button for ten seconds, then release the Side button while still holding the Digital Crown until iTunes greets you with a message confirming your Apple Watch is in DFU mode.
|
No comments:
Post a Comment